CPL Quick Reference Support Guide 2023

055

firing cycle. Most common example is the 1911 Government Model.

Striker-fired: Semi-auto pistol where the hammer and firing pin are replaced with a spring- tensioned punch. The trigger releases the striker to impact the cartridge’s primer. Some designs place partial spring pressure on the striker but obstruct it with an internal block to prevent discharge without pressure on the trigger. Butt: on a rifle or shotgun, the butt is the end of the gun that you rest against your shoulder while firing. It’s just the end bit of the stock, which is the larger, triangular piece of wood at that end. Pistols technically have butts, but it’s just a small area at the bottom of the grip. The butt serves as a brace for your arm, and it absorbs some of the shock of the blast. Stock: The stock is the large (usually wooden, on rifles and shotguns) part of the gun behind the action. You wrap your arm around it when you shoot. It serves as the handle of your firearm. The stock is also an aesthetic piece. This is where you’ll see the grain of the wood on classic rifles/shotguns, and where the ornate decorative bits will be on pistols. Barrel: the barrel is the tube through which the bullet passes on its way from the firing chamber to the muzzle. The barrel also contains the bore, which is a term that refers to the actual channel the bullet travels through. Trigger guard: the trigger guard is a piece of metal which forms a ring around the trigger lever. It’s designed to prevent accidental firing. Safety: the safety can look any number of ways. It might be a button, a sliding component, or something else. Be sure you know exactly where it is and what it looks like on your firearms! It should be located next to the trigger, on the action. The safety blocks the trigger mechanism. While the trigger guard can only prevent the trigger from being knocked back accidentally, the safety, will keep the trigger from moving even if you squeeze it with your finger inside the guard. Muzzle: the muzzle is the opening on the business end of the gun, at the end of the barrel. Breech: the breech is where you load ammunition on the vast majority of guns. It’s located at the midsection of the firearm, usually as part of the action. Some shotguns and older rifles/pistols are what are called “muzzle-loaders”, because you have to load ammunition through their muzzles. Breech-loaded guns are much safer, and the norm on the market today. Chamber: the chamber is a section of the barrel (usually behind the breech) where the actual cartridge is stored for firing. Cylinder: these are only found on revolver-style pistols. On those guns, the cylinder is the component that keeps all the rounds loaded, rotating as you fire through them. Magazines: these are only found on repeating weapons. They store a bunch of cartridges, and fit into the breech of the gun. In most cases, they’re detachable. Bolt: some rifles are called “bolt-action” firearms. They have a moving metal piece which fits over the breech to seal the cartridge into the firing chamber. Bolt handle: the bolt handle controls the bolt, and you’ll use it to load and unload any bolt-action firearm. Sight: most guns are equipped with basic iron sights, which have a front and back part. You aim by pointing your weapon so that the sights fall in line with each other. You can use these to eyeball targets at close range, but they’re no substitute for a scope beyond 50 yards.